ROLL LOAD CELL
Features: Possibility of lateral bearing greasing, easy to assemble, possibility of internal amplifier 4-20mA / 0-10V, for bearings Ø32, 35, 40, mm .
Applications: measure of tension tape, tessil, paper, metallic laminated, plastic, flexographic printing presses, photografic development machinery etc.
Click to enlarge image
| Material | Stainless steel+Steel |
| Nominal load | 150, 250, 350, 500, 750, 1000 |
| Breaking load | 300 % of full scale |
| Maximum transversal load | 500 % of full scale |
| Nominal load deflection | 0,12 mm |
| Supply voltage | Maximum 18 V dc |
| Output | 1 mV/V |
| Output tollerance | 0,1 % F.S. |
| Zero tollerance | 1 % F.S. |
| Linearity | 0,1 % F.S. |
| Hysteresis | 0,03 % F.S. |
| Reapeatability | 0,1 % F.S. |
| Input resistance | 350-360 ohm |
| Output resistance | 350-353 ohm |
| Insulation resistance | >= 2000 Mohm |
| Creep (30 Minutes) | 0,03 % F.S. |
| Thermal compensation | -10 / +40°C (14 / +104°F) |
| Operating temperature | -20 / +70°C (-4 / +158°F) |
| Temperature deviation zero | 0,003 % F.S. / °C |
| Temperature deviation full scale | 0,002 % F.S. / °C |
| Protection class | IP 54 |
| Connection | Panel male connector UTS08E4P |
| Standard cable length | Loose female connector UTS6JC8E4S, connection cable 4 x 0,25 (length to be defined) |
General precautions to be followed in the installation and assembly of load cells:
